Modul Setting IP, NAT dan DNS Di Mikrotik

Pemberian IP Address

Ip address kita berikan pada interface gateway local dan bridge. Pemberian ip pada bridge interface tidak mutlak, pemberian ip ini hanya untukmemudahkan remote access dari luar.

/ip address print
/ip address add address=172.168.0.3/40 interface=serverbridge disabled=no
/ip address print
/ip address add address=192.168.0.254/16 interface=eth2-lokal disabled=no
/ip address print

Selanjutnya kita setting default gateway kita.

/ip route add gateway=172.168.0.3
/ip route print

Kemudian kita test ping ke gateway

/ping 222.124.23.41

Konfigurasi NAT (Network Address Translation)

NAT berfungsi untuk meneruskan paket dari ip local ke ip public (fungsi gateway router)

/ip firewall nat add chain=srcnat action=src-nat to-addresses=172.168.0.3 to-ports=0-65535 out-interface=serverbridge disabled=no
/ip firewall nat add chain=dstnat action=dst-nat to-addresses=172.168.0.6 to-addresses=172.168.0.6 to-addresses=172.168.0.6 to-ports=2011 dst-port=80 in-interface=eth2-local disabled=no

Setting DNS

/ip dns set primary-dns=172.168.0.6 allow-remoterequests=yes
/ip dns set secondary-dns=202.134.1.10 allow-remoterequests=yes
/ip dns print